Collections
Filters
CO Detectors
1 product
The regarded gas has no smell and color. It is impossible to feel it. It is produced as a result of incomplete combustion of charcoal, wood, oil, natural gas, kerosene, propane, etc. It is a slow-acting poison. It envelops the room gradually and imperceptibly.
It is impossible to detect this gas without special devices. It is especially dangerous for sleeping people. Even if the concentration of gas is low in the air, still, it may lead to death in case of long-term exposure. This is because the chemical compound stops supplying the brain and heart with oxygen. Dizziness and weakness can become symptoms. That is why it is important to ensure proper ventilation in a room (especially in a bedroom).
A smoke and carbon monoxide detector is the tool that is designed to cope with this task and control the level of CO in a premise.
Types of the Good
Depending on the principle and method of detecting smoke and carbon monoxide in the air, there are three types of such technical devices.
- A semiconducting tool
CO detection is based on a change in the electrical conductivity of the air. It leads to a discharge between the contacts of a semiconductor sensor, a circuit closure, and a light and sound smoke and carbon monoxide alarm.
- An infrared piece
It is triggered by a sharp change in electromagnetic radiation caused by a CO admixture in the air. LEDs are used as sensors in such devices. They are equipped with a system of light filters for setting precise values of gas concentration.
- A catalytic device
An increased CO level in the air is determined by the change of the value of the electric current in the gas analyzer circuit that includes a container with electrolyte. Carbon monoxide molecules activate an electrolytic chemical reaction. This leads to an increase in the strength of the electric current. As a result, the sensor is triggered at a preset factory value, and a carbon monoxide alarm is generated.
Points to Know Before Installation
The process is simple. But, it is necessary to keep in mind several points:
- A carbon monoxide detector should be installed at a height of 1.5 m from the floor.
- No less than 1-4 m near a stove or other type of heating unit. But not closer than 1 m to avoid thermal damage to the device’s body.
- Check the battery before starting an examination.
No home safety system is complete without the product. A smoke carbon monoxide detector is designed to secure living premises, houses, warehouses, etc. Their main purpose is to prevent people from inhaling poisonous gases. It can’t be harmful. It is aimed at taking care of humans’ health.
To buy a high-quality tested CO detector, look through the offered products. On the page, visitors will find a great variety of models from well-known world manufacturers. Their cost will please customers.
The regarded gas has no smell and color. It is impossible to feel it. It is produced as a result of incomplete combustion of charcoal, wood, oil, natural gas, kerosene, propane, etc. It is a slow-acting poison. It envelops the room gradually and imperceptibly.
It is impossible to detect this gas without special devices. It is especially dangerous for sleeping people. Even if the concentration of gas is low in the air, still, it may lead to death in case of long-term exposure. This is because the chemical compound stops supplying the brain and heart with oxygen. Dizziness and weakness can become symptoms. That is why it is important to ensure proper ventilation in a room (especially in a bedroom).
A smoke and carbon monoxide detector is the tool that is designed to cope with this task and control the level of CO in a premise.
Types of the Good
Depending on the principle and method of detecting smoke and carbon monoxide in the air, there are three types of such technical devices.
- A semiconducting tool
CO detection is based on a change in the electrical conductivity of the air. It leads to a discharge between the contacts of a semiconductor sensor, a circuit closure, and a light and sound smoke and carbon monoxide alarm.
- An infrared piece
It is triggered by a sharp change in electromagnetic radiation caused by a CO admixture in the air. LEDs are used as sensors in such devices. They are equipped with a system of light filters for setting precise values of gas concentration.
- A catalytic device
An increased CO level in the air is determined by the change of the value of the electric current in the gas analyzer circuit that includes a container with electrolyte. Carbon monoxide molecules activate an electrolytic chemical reaction. This leads to an increase in the strength of the electric current. As a result, the sensor is triggered at a preset factory value, and a carbon monoxide alarm is generated.
Points to Know Before Installation
The process is simple. But, it is necessary to keep in mind several points:
- A carbon monoxide detector should be installed at a height of 1.5 m from the floor.
- No less than 1-4 m near a stove or other type of heating unit. But not closer than 1 m to avoid thermal damage to the device’s body.
- Check the battery before starting an examination.
No home safety system is complete without the product. A smoke carbon monoxide detector is designed to secure living premises, houses, warehouses, etc. Their main purpose is to prevent people from inhaling poisonous gases. It can’t be harmful. It is aimed at taking care of humans’ health.
To buy a high-quality tested CO detector, look through the offered products. On the page, visitors will find a great variety of models from well-known world manufacturers. Their cost will please customers.
Collections
Filters